I.成都工业学院Brief Introduction to CDTU
Chengdu Technological University (CDTU) was established in 1913, and it is a public full-time undergraduate University. CDTU is one of the Vice President Units of National Application-oriented University Alliance and President Unit of Sichuan Provincial Application-oriented University Alliance. CDTU has always insisted on the education mode of Integration of Production, Education, and Research and paid close attention to students’ ability of learning, practice and creativity. Approved by Ministry of Education, CDTU is proud of having 3 National-level Training Bases (Electromechanical Engineering, Numerical Control Technique and Automobile Detection & Maintenance ) and 3 Provincial Key Labs (Molding , Electric Processing laboratories and UAV Control System Application and Technology) and 2 Provincial Philosophy and Social Sciences Research Center (on Sociology and Education of Sexuality and UAV Industry Development Research Center).
Having stuck to the University development goals, CDTU put every effort to implement our opening up and international strategy. In order to cultivate application-oriented innovative talents, we have been setting up many platforms for our students and faculty members. And we have been cooperating with more than 20 universities in Germany, Great Britain, United States, Canada, New Zealand, Ireland, Demark, and some “Belt and Road” countries, like Russia, Poland, Ukraine, Hungary, Thailand as well as Hongkong Region and Taiwan Region. Currently, CDTU has offered Degree Programs and Chinese Language Program for international students. The international students mainly come from Russia, Mongolia, Nepal, Bangladesh, Thailand, and so on. During the past several years, the one-time employment rate of the graduates remains at above 95%, ranking among the best of the engineering universities in Sichuan.
II.招生专业（中文授课）Programs (Taught in Chinese)
1.郫都校区（6个）Pidu Campus (6 Programs)
1.1电子信息工程Electronic Information Engineering
Electronic Information Engineering Program highlights students’ hands-on ability cultivation, and it aims to cultivate primary-level application-oriented technicians with favorable quality and innovation ability. After graduation, the students in this program can work as electronic engineer, circuit engineer, embedded software development and test engineer, hardware engineer, software engineer and communication engineer.
1.2微电子科学与工程Microelectronic Science and Engineering
Microelectronic Science and Engineering focuses on enabling the students to master basic theoretical knowledge and skills of microelectronics, and to cultivate students’ professional knowledge and skills of semiconductor process manufacturing, microelectronic assembly and packaging, automation system design, process design, product design, system testing, equipment operation and maintenance. It aims to cultivate frontline application-oriented engineers and technical personnel who can work in research, manufacturing, packaging and other fields of microelectronic components and integrated circuit chips. The graduates can work in enterprises and institutions of integrated circuit manufacturing and scientific research institutes, mainly engaged in manufacturing process, equipment maintenance and production management. They can also work in integrated circuit design enterprises and institutions and research institutes, engaged in circuit design, layout design and other work.
1.3电子科学与技术Electronic Science and Technology
Electronic Science & Technology Program focuses on students’ theoretical knowledge and engineering practice abilities of Electronic Science and Technology. It will help the students to prepare their abilities of computer, foreign language and relevant engineering technology application; as well as their abilities of tracking new theories, new knowledge, and new technology. It aims to cultivate high-quality grass-roots applied talents who can engage in applied research, research and development, test analysis, manufacturing and management in the fields of new electronic materials and new energy resources. Graduates can work in lithium, photoelectricity and other new energy industries.
International Business Program consists of two specialized directions: Cross-border E-commerce and Retail Commerce. It aims to cultivate application-oriented international talents who can engage in the fields of business management, cross-border e-commerce, retail commerce, freight forwarding, insurance declaration and other related work in foreign-related enterprises, e-commerce companies and various foreign trade agencies.
Logistics Management Program was approved by the Ministry of Education in 2019 as the first batch of National First-class Undergraduate Programs. It has formed two specialized directions of Supply Chain Logistics and International Logistics. It aims to cultivate students’ abilities of practical problems-solving in the fields of logistics management of industrial and commercial enterprises, operation and management of logistics enterprises, and other adjacent positions.
1.6电气工程及其自动化Electrical Engineering and Automation
Electrical Engineering and Automation Program mainly helps students to prepare the theoretical knowledge ad basic skills of electrical and electronic technology, motor and control application, power electronics technology and application, electric power system operation and analysis. Students will learn to solve the engineering practical problems by applying what is learned. They will be equipped with excellent scientific literacy and engineering practice skills; and can work in electrical engineering and other related fields of electric power system operation and control, electrical equipment application integration, enterprise power supply management and services. Graduates can work in power plants, power grid enterprises and electrical manufacturing enterprises, engaged in electric energy generation, transmission, distribution. They can also work in companies, designing institutes and research institutes; engaged in engineering design, equipment manufacturing, application and development, operation maintenance and production management of electrical engineering.
2.宜宾校区（5个）Yibin Campus (5 Programs)
2.1智能制造工程Intelligent Manufacturing Engineering
Intelligent Manufacturing Engineering Program integrates advanced German teaching philosophy and methods into the curriculums, and it forms a talents cultivation mode with the characteristics of Sino-Germany cooperation. It has domestic first-class intelligent manufacturing practice bases and Sino-Germany joint laboratory of intelligent manufacturing. This program has strengthened engineering practice, payed attention to students’ innovation consciousness and innovation capability. Graduates have a wide range of employment opportunities. They can engage in intelligent product design and manufacturing, CNC machine tools and industrial robots installation, commissioning and maintenance, intelligent factory system integration, information management, application research and production management in the fields of Intelligent manufacturing product development, Intelligent Equipment Manufacturing as well as Intelligent Product Management.
2.2机械设计制造及自动化* Mechanical Design, Manufacturing and Automation*
Mechanical Design, Manufacturing and Automation Program focuses on integrated and practical cultivation, and it aims to cultivate innovative talents of high-end manufacturing science and technology who can work in the field of advanced manufacturing. It has favorable practical teaching conditions, including: two national training bases (Electromechanical Engineering, Numerical Control Technique), one real factory, one key laboratory of Sichuan province, and so on. It has established 11 off-campus practical teaching bases collaborated with many leading enterprises, like Foxconn, Changhong. Graduates can engage in machinery manufacturing, intelligent equipment design, development, management, application in the field of manufacturing.
2.3汽车服务工程Automobile Service Engineering
Automobile Service Engineering Program aims to cultivate the talents who can meet the requirements of social economic development and industry technological progress. Students will master the basic theories, knowledge and methods of Automobile Service Engineering. The students will be equipped with sense of social responsibility, innovative spirit and practical ability. They will be cultivated into application-oriented and versatile engineers so that they can engage in the work of engineering, management, teaching, scientific and research in the field of automotive engineering service, automobile finance and management services as well as automotive manufacturing. Graduates can not only work in automotive vehicle and parts manufacturers, but also work in the fields of automotive sales, evaluation, inspection and maintenance and finance and insurance. Or graduates can choose to engage in scientific research and teaching in some institutes and universities.
2.4轨道交通信号与控制Rail Transit Signal and Control
Rail Transit Signal and Control Program helps students to master automatic control theory, rail transit control technology, computer principles and application technology, sensor and detection technology, programmable controller principle and application, power electronic technology, etc. Graduates can engage in system operation, automatic control, information processing, experimental analysis, R & D and design, operation and maintenance management in the fields of railway, urban rail transit, electronics, information, instrument, etc., and they can also work on teaching and scientific research in universities and research institutes.
Project Cost Program aims to cultivate students to be able to engage in project planning, urban and rural development cost planning, engineering measurement and valuation, cost control, construction estimate, bidding and contract management, project audit and others in the field of civil engineering and related engineering. The students will have strong professional comprehensive quality, teaming and collaboration ability, good professional ethics and social adaptability. Meanwhile, students will be equipped with strong innovation and entrepreneurship spirit as well as international view, and they will master the basic technical knowledge of construction engineering and basic knowledge of management, economics and law related to the project cost. They will be cultivated into application-oriented engineers and management personnel, and they can have a good command of engineering modeling and measurement valuation.
Note:The programs with* means that the students will spend the first two years in Yibin campus, and the last two years in Pidu campus.
III.学习年限Duration of Study
1.四年（通过HSK4考试）Four years (HSK4 or above holders )
2.预科一年+本科四年（未通过HSK4考试）One academic year preparatory education plus four years academic study ( not pass HSK 4)
Non-Chinese nationality, physically and mentally healthy
Holding high school diploma or equivalent or above
Under 25 years old
V.收费标准（人民币：元/学年）Charges (RMB: yuan/ Academic year)
2.预科教育Preparatory Education (Chinese language study for one academic year)
Note:The fees of text books, study supplies and bed necessaries are not included.
1.《成都工业学院外国学生来华学习申请表》Chengdu Technological University Application Form for International Students
2.最高学历证书复印件Academic diploma: A photocopy of the applicant’s latest academic diploma or certificate
3.成绩单复印件：本人最高学历成绩单Academic transcript: A photocopy of academic record of the latest academic diploma or certificate
4.最高学历公证书，需由中国驻申请者所在国使（领）馆出具Highest degree notarization, which must be issued by the local Chinese Embassy or Consulate General
5.申请人护照复印件Photocopy of applicant’s passport
6.申请人近六个月证件照Electronic version of Applicant’s photo with the passport size
7.申请人紧急联系人的身份证复印件A photocopy of the ID of the applicant’s emergency contact
8.汉语水平考试四级及以上成绩单复印件A photocopy of HSK 4 or above certificate
9.《外国人体格检查记录》结果Foreigner Physical Examination Result
10.无犯罪记录证明No Criminal Record
11.经济担保声明Financial Guarantee Statement
成都工业学院留学生奖学金CDTU International Students Scholarship
First-class: Tuition and accommodation fees are waived for one academic year.
Second-class: Tuition is waived for one academic year.
Third-class: Tuition is half waived.
VIII.入学申请流程Admission Application Procedure
Visit the website of International Office of CDTU (http://wsb.cdtu.edu.cn/bszn.htm) to download CDTU Application Form for Foreign Students to Study in China and Foreigner Physical Examination Record
Fill CDTU Application Form for Foreign Students to Study in China with genuine signature
Finish physical examination in local public health institution according to the requirement of Foreigner Physical Examination Record. The health report will be invalid if there’s any missing item, no photo of the applicant, missing the signature of doctor. The applicant should fix the date of examination for the result with a validity period of 6 months.
Prepare other required application materials, and submit the scanning copies of all the documents to IO of CDTU via e-mail. E-mail: email@example.com
The qualified applicants will be sent with Admission Letter and Visa Application Form for Foreign Students Studying in China one or two months earlier before academic term begins.
Applicants should bring the Admission Letter, Visa Application Form for Foreign Students Studying in China and Foreign Physical Examination Record to the Chinese embassy to apply for the visa.
Ps: The materials will not be returned if the applicant is admitted or not.
IX.奖学金申请流程Scholarship Application Procedure
1.登录成都工业学院外事办公室网站（http://wsb.cdtu.edu.cn/bszn.htm）下载专区，下载并填写《成都工业学院留学生奖学金申请表》；Visit the website of International Office of CDTU (http://wsb.cdtu.edu.cn/bszn.htm) to download CDTU International Students Scholarship Application Form.
2.准备本人最高学历成绩单Academic transcript: A photocopy of academic record of the latest academic diploma or certificate
Any other supportive documents, like Certificate of Awards & Honors or HSK certificate.(P.S. All of the certificates should be obtained in the past two years.)
X.重要时间窗Important Time Window
1.申请截止时间：6月30日 Deadline of Application: June 30
2.入学时间：9月上旬 Admission Date: Early September
成都工业学院外事办公室International Office ofChengdu Technological University
Address: No.1, Section 2, Zhongxin Avenue, Pidu district, Chengdu, Sichuan, China.